NPC-Mini Puller/Cutter

Puller Specs:

• 2” Wide x 12” and 20” Long traction belt length
• Speed Range: 200-750 ft/min Max (see below)
• Beam side plates anodized aluminum with
• Stainless Steel shafting, hard coat anodized pulleys
• Full guarding
• Rigid linear bearings for stiffness

Cutter Specs:

• 2.25” OD Cutter Bushings
• On Demand: 500 cut/min
• Continuous: 3000 (or 6000 with 2 blades) cut/min
• Blades: (6) Stainless Steel Medex Blades
• Dual axis slide base for cutter on linear rails or easy movement

For Other Speeds Order:

• opt-mini-GEAR-25-1.25-125 fpm
• opt-mini-GEAR-16- 2.0-200 fpm
• opt-mini-GEAR-7- 4.5-450 fpm
• opt-mini-GEAR-5- 10.0-750 fpm

Other Belt Material Choices:

• White FDA nitrile 40 duro, 4.4mm total thick close faced back sponge (non FDA) 6.4mm total thick
• 2 layer 5mm closed face sponge 1mm ground fda silicone, 7.4mm total thick, 55 Duro natural Rubber