General Parts

Most Commonly Used on Coilers and Levelwinds

Most Commonly Used on Coilers and Levelwinds

Most Commonly Used on Coilers and Levelwinds

Brass ejection nut for Reelpower's RD 5 and RD10P/N 2102-029

Replacement Fixed caster, 4"x 2" Phenolic, non-marking fits the following Reelpower Industrial machines WKT3, WK3, WKP, Mini Penthouse and Maxi Penthouse equipmentP/N 10925-36

Replacement Floor lock, 4", fits the following Reelpower machines NK4, WKT3, WK3, WKP, Mini Penthouse and Maxi Penthouse equipment. P/N 12250-02  sold as each 

Replacement kit for Hydraulic Handles

Replacement Swivel caster, 4"x 2" Phenolic, non-marking fits the following Reelpower Industrial machines WKT3, WK3, WKP, Mini Penthouse and Maxi Penthouse equipmentP/N 10925-01

Replacement 12 Ton bottle jack with handleP/N 13150-20

Replacement 6 Ton bottle jack with handle, fits the following Reelpower machines WKT3, WK3, and WKPP/N 13150-21

Replacement 8 Ton bottle jack with handleP/N 13150-01

Step Bushing (cast material) designed to slide over a 1.38" Shaft and aligning with Reel Arbor holes of 2", 2.5", AND 3" OD, generally works with Reelpower WK3, WKT3, WKP and NK...

Reel Skate is designed to move fully loaded reels or spools on their flanges. The Reel Skate can handle reel flanges up to 5" wide and weights of 40,000 lbsP/N 0202-200

Manual traverse Swing Arm for mounting a measurer. Replacement Swing Arm fits the following Reelpower machines WKT3 and WK3P/N 0207-919

HSS series Drive Pin 3/8" diameter x 4" long Stainless Steel with Hex nut p/n 1250-773 and 13988-013

1.0" CAM ROLLER WITH HEX SOCKET, normally fits onto WK3, WKT3, NK4 and CRS cable reel standsP/N 10915-23

1.75" CAM ROLLER WITH HEX SOCKETP/N 10915-22

1” OD Drive Pin, the drive pin are made of steel Replacement drive pin for models NK4 and WKT3

Coiler Clamp p/n 11135-35

3/4” OD DRIVE PIN P/N 1080-006 The drive pin are made of steel Replacement drive pin for models NK4 and WKT3

UC2000-L2-E5-V15 PEPPERL+FUCHS ULTRASONIC SENSOR USE WITH CORD SET V1-W-2M-PUR

Aluminum Locking Clamps 1” OD size shafts p/n 100015928* Easy to use aluminum locking clamps are lightweight and are non-marring against the shaft surface Available Clamps...

Aluminum Locking Clamps 1.5” OD size shafts p/n 100016051 Easy to use aluminum locking clamps are lightweight and are non-marring against the shaft surface Available Clamps...

The “Mini-Penthouse” is ideally suited for pulling material from reel racks, reel roller platforms or a pay-out cart. Also, ideal for use with an extrusion line when equipped...

MODEL 1700 Material Measuring MeterFor Flexible Material 1/8” to 2” Diameter +/- 1/2% Accuracy.